2396018521 8C3F(50HP,460/380,6/5,W)SF

Franklin’s 8-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options.

Item: 2396018521
Model: 8C3F(50HP,460/380,6/5,W)SF
Type Sand Fighter

Ratings

HP 50 hp
Frequency 50/60 Hz
Phases Three-Phase
Amps - Full Load 64 A
Amps - Service Factor 73 A
Volts 380 VAC / 460 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Motor Connection DOL
Thrust Bearing Rating 10000 lb
Lead Length 13 ft
Motor Encapsulated
Continuous Duty Yes
Efficiency Service Factor Load [%] 87.00 %
Protection [IP] IP68
Lead Wire Size AWG #8
Motor Insulation Classification F
Poles 2
S.F. 1.15
Motor Cooling Water
Minimum Cooling Flow .50 ft/sec
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 10000 lb
Motor Adapter Double flange
Rotation Counter clockwise facing the shaft
SubTrol Heat Sensor YES Yes

Materials of Construction

Motor Shaft End - Material 17-4SS
Thrust Bearing Kingsbury
Seal Mechanical Seal SiC/SiC
Lead Insulation Material XLPE
Diaphragm Material Nitrile Rubber (NBR)
Motor Bottom End Bell Material Cast Iron with E-Coat Paint
Motor Fill Solution (Water Soluble / Non Toxic) YES
Motor Fill Solution FES91
Motor Top End Bell Material Cast Iron with E-Coat Paint
Shaft Slinger Material Nitrile Rubber (NBR)
Stator Ends Material Carbon Steel
Stator Fill Resin
Stator/ Motor Shell Material 300 Series SS
Winding Material Copper

Dimensions

Motor Diameter - Physical Diameter 7.70"
Motor Length 39.4 "
Product Weight 312 lb
Product Weight with Pack 345 lb
Carton Length 52.25 "
Carton Width 9 "
Carton Height 17 "
Shaft Diameter 1.5 "
Shaft End Spline

Other

Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing