700401 – FG100-T-20
The FG100 Series 1 hp Grinder Pump is designed for the toughest residential and light commercial wastewater applications as a new or drop-in replacement for any effluent or sewage pump struggling with clogs and binding wastewater applications. 20' cord, 115V, cast iron construction, automatic operation with tethered float
| Item: | 700401 |
| Model: | FG100-T-20 |
Ratings |
|
| HP 60Hz | 1 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Full Load | 12.5 A |
| Starting Amps | 65 A |
| Volts | 115 VAC |
| Cord Length | 20 ft |
| Continuous Duty | Yes |
| Motor Insulation Classification | F |
Operation |
|
| Maximum Flow Rate - 60 Hz | 52 gpm |
| Shut Off | 51 m |
| Shut Off 60 Hz | 53 ft |
| Switch | Tethered |
| Pump rpm - 60 Hz | 3450 |
Liquid |
|
| Maximum Fluid Temperature | 140 °F |
Materials of Construction |
|
| Pump Base Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Impeller | Vortex |
| Impeller Material | Cast Iron |
| Motor Shaft End - Material | 420 Stainless Steel |
| Intake Screen Material | Stainless Steel |
| Seal Material | Silicon Carbide / Nitrile |
| Seal | Mechanical Seal |
| Motor Fill Solution | Oil (white oil) |
| Volute / Side Inlet Material | Cast Iron |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 2 " |
| Product Length | 11.4 " |
| Product Width | 10.1 " |
| Product Height | 17.5 " |
| Pump Length | 11.4 " |
| Product Weight | 78 lb |
| Product Weight with Pack | 82 lb |
| Carton Length | 13.5 " |
| Carton Width | 12.4 " |
| Carton Height | 19.6 " |
| Pump Height | 17.5 " |
| Pump Width | 10.1 " |
| Shaft Diameter | 0.88 " |
Other |
|
| Electrical Agency Approvals | cULus |
| Warranty Standard Time | 36 Months |
| Applications | Residential and light commercial sewage waste transfer |
