90041530 15SDSP-3.0HP

The System Solution to your solar pumping requirements. Using Franklin quality components, our technical expertise in groundwater pumping, and innovative thinking based on global market inputs, we have developed a rugged, high-output solar-powered pump system which tackles the challenges of remote and harsh environments. No other solar-powered pump system delivers the features, benefits, and reliability of SubDrive SolarPAK in just one package!

Item: 90041530
Model: 15SDSP-3.0HP
Type Water Well

Ratings

HP 3 hp
Phases Three-Phase
Amps - Service Factor 12.5 A
Volts 200 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 900 lb
Motor Submersible
Continuous Duty Yes
Efficiency Service Factor Load [%] 77.00 %
Hz DC Input
Input Phase DC Input
Output Phase Three-Phase
Input Power Factor 1
Input Power Max 3500 W
Input Voltage DC 190-330 VDC
Lead Retainer Method Lead Jam Nut
Maximum Motor HP (DC Input) 3 HP
Minimum Output Frequency 30Hz
Maximum Output Frequency 68Hz
Maximum Output Current 12.5 A
Output Voltage - 3 Phase (VAC) 200 VAC
S.F. 1.15
Flow 15 gpm
Shut Off 788 ft
Shut Off 60 Hz 802 ft
Stages 15
Pressure Sensor Included No
Pressure Transducer Included NO
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 900 lb
Enclosure Rating Type 3
Minimum Operating Temperature -13 °F
Maximum Operating Temperature 122 °F
Pressure Transducer Included NO
Storage Temperature -13° to 144 °F (-25° to 65 °C)
Submersible Use No
SubTrol Heat Sensor NO No

Liquid

Maximum Fluid Temperature 120 °F

Materials of Construction

Pump Body Material AISI 304 Stainless Steel
Discharge Head Material Stainless Steel
Impeller Material Acetal
Motor Bracket Material Stainless Steel
Check Valve No
Discharge Material Stainless Steel AISI 304
Intake Screen Material Stainless Steel
Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Cable Guard Material Stainless Steel
Diaphragm Material Nitrile Rubber (NBR)
Flow Switch Included YES
Motor Construction Design Super Stainless
Motor Fill Solution (Water Soluble / Non Toxic) NO
Shaft Slinger Material Nitrile Rubber (NBR)
Stator/ Motor Shell Material Stainless Steel
Suction Material Stainless Steel AISI 304
Shelf Life 1.5 year

Dimensions

Discharge Thread FNPT
Discharge Diameter 1.25 "
Diameter With Cable Guard 3.9 "
Motor Length 20.18 "
Pump Length 26.17 "
Product Weight with Pack 104 lb
Carton Length 29.63 "
Carton Width 15.81 "
Carton Height 23.5 "
Pump Diameter 3.9 "
Shaft End Spline

Other

Component Drive Part Number 5870301223
Component Motor Part Number 2343062604G
Component Pump Part Number 90021512
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals cUL Listed / UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing