91240025 – FDSP-1HP-FCE
Fhoton™ Surface SolarPAK solar-powered pump systems are designed to meet pressure boosting and water transfer needs while running on the power of the sun. Utilizing industry-proven cast iron and stainless steel pumps, these solar-powered pump systems are available in a range of horsepower sizes that offer high performance solar pumping for a wide variety of applications. Whether boosting water pressure from a cistern tank, solar fountain, or other surface source, Franklin's quality solar products will fit your renewable energy needs.
| Item: | 91240025 |
| Model: | FDSP-1HP-FCE |
Ratings |
||
| HP | 1 hp | |
| Phases | Three-Phase | |
| Volts | 208-230 VAC | |
| Voltage Tolerance (%) | -10.0% / +10.0% | |
| Wire | 3-Wire | |
| Motor | Surface | |
| Hz | DC Input | |
| Input Phase | DC Input | |
| Output Phase | Three-Phase | |
| Input Power Factor | 1 | |
| Input Power Max | 2000 W | |
| Input Voltage DC | 115-420 VDC | |
| Maximum Motor HP (DC Input) | 1 HP | |
| Minimum Output Frequency | 20Hz | |
| Maximum Output Frequency | 60Hz | |
| Maximum Output Current | 6.8 A | |
| Output Voltage - 3 Phase (VAC) | 200 VAC | |
| Flow | 25 gpm | |
| Shut Off | 272.31 ft | |
| Stages | 1 | |
| Pressure Sensor Included | No | |
| Pressure Transducer Included | NO | |
| Enclosure Rating | Type 4 | |
| Minimum Operating Temperature | -13 °F | |
| Maximum Operating Temperature | 122 °F | |
| Pressure Transducer Included | NO | |
| Storage Temperature | -13° to 144 °F (-25° to 65 °C) | |
| Submersible Use | No | |
| SubTrol Heat Sensor | NO | No |
Materials of Construction |
|
| Check Valve | No |
| Discharge Material | Cast Iron |
| Flow Switch Included | YES |
| Motor Fill Solution (Water Soluble / Non Toxic) | NO |
| Suction Material | Cast Iron |
| Shelf Life | 1.5 year |
Dimensions |
|
| Discharge Thread | FNPT |
| Discharge Diameter | 1.25 " |
| Carton Length | 20.88 " |
| Carton Width | 12.06 " |
| Carton Height | 25.13 " |
Other |
|
| Component Drive Part Number | 581014200864-14IC000 |
| Component Pump Part Number | 90203010 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | cUL Listed / UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
