95201010 10JV05P4-2W230

The standard J-Class Series V submersible pump features unique hydraulics that improve efficiency and minimize wear even when pumping abrasives. Discharge and motor brackets are available in thermoplastic or stainless steel with a removable check valve system. Available in 5, 7, 10, 15, 20, and 25 gpm, 1/2 - 5 horsepower.

Item: 95201010
Model: 10JV05P4-2W230

Ratings

HP 1/2 hp
Frequency 60 Hz
Phases Single-Phase
Amps - Service Factor 6 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 2-Wire
Motor Encapsulated
Continuous Duty Yes
Efficiency Service Factor Load [%] 60.00 %
Lead Retainer Method Lead Jam Nut
Flow 10 gpm
Shut Off 60 Hz 244 ft
Stages 6
Motor Ambient Temperature Rating Nominal 86 °F

Liquid

Maximum Fluid Temperature 120 °F

Materials of Construction

Pump Body Material AISI 304 Stainless Steel
Impeller Material Acetal
Motor Bracket Material Thermoplastic
Check Valve Yes
Discharge Material Thermoplastic
Intake Screen Material Thermoplastic
Thrust Bearing Kingsbury
Lead Insulation Material XLPE
Cable Guard Material Thermoplastic

Dimensions

Discharge Thread NPT
Discharge Diameter 1.25 "
Product Length 22.48 "
Diameter With Cable Guard 3.9 "
Motor Length 9.51 "
Pump Length 12.97 "
Product Weight 25 lb

Other

Component Motor Part Number 2445059004GS
Component Pump Part Number 95211000
Drinking Water Agency Approvals ANSI/NSF Standard 61
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Applications Groundwater pumping in clean water well systems 4" diameter and greater