2366264020 6C3F(30HP,575,6,S)

Franklin's 6-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. These motors provide large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.

Item: 2366264020
Model: 6C3F(30HP,575,6,S)
Type 316SS

Ratings

HP 30 hp
Frequency 60 Hz
Phases Three-Phase
Amps - Full Load 31.6 A
Amps - Service Factor 36.2 A
Volts 575 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Motor Connection DOL
Thrust Bearing Rating 3500 lb
Lead Length 13 ft
Motor Encapsulated
Continuous Duty Yes
Efficiency Service Factor Load [%] 83.00 %
Protection [IP] IP68
Lead Wire Size AWG #10
Lead Retainer Method Lead Jam Nut
Motor Insulation Classification F
Poles 2
S.F. 1.15
Motor Cooling Water
Minimum Cooling Flow .50 ft/sec
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 3500 lb
Motor Adapter Double flange
Rotation Counter clockwise facing the shaft
SubTrol Heat Sensor YES Yes

Materials of Construction

Motor Shaft End - Material 17-4SS
Thrust Bearing Kingsbury
Seal Mechanical Seal SiC/SiC
Lead Insulation Material Overmolded
Diaphragm Material FKM
Motor Bottom End Bell Material 316SS
Motor Fill Solution (Water Soluble / Non Toxic) YES
Motor Fill Solution FES91
Motor Top End Bell Material 316SS
Shaft Slinger Material Nitrile Rubber (NBR)
Stator Ends Material 316SS
Stator Fill Resin
Stator/ Motor Shell Material 316SS
Winding Material Copper

Dimensions

Motor Diameter - Physical Diameter 5.44"
Motor Length 38.6 "
Product Weight 162 lb
Product Weight with Pack 176 lb
Carton Length 42.25 "
Carton Width 7.25 "
Carton Height 10.5 "
Shaft Diameter 1 "
Shaft End Spline

Other

Electrical Agency Approvals UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing