2347298602G 4C3F(10,460/380,60/50,W)

The Franklin 4-inch Super Stainless motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers 4-inch motors in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.

Item: 2347298602G
Model: 4C3F(10,460/380,60/50,W)
Type Water Well

Ratings

HP 10 hp
Frequency 50/60 Hz
Phases Three-Phase
Amps - Full Load 14.5 A
Amps - Service Factor 16.5 A
Volts 380 VAC / 400 VAC / 415 VAC / 460 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 1500 lb
Lead Length 8 ft
Motor Submersible
Continuous Duty Yes
Lead Wire Size AWG #14
Lead Retainer Method Clamp Style
Motor Insulation Classification B
Poles 2
S.F. 1.15
HP 10 hp
Lead Yes
Service Factor - 50Hz 1
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 1500 lb
Rotation Counter clockwise facing the shaft

Materials of Construction

Thrust Bearing Kingsbury
Seal Lip Seal Ring
Diaphragm Material Nitrile Rubber (NBR)
Motor Fill Solution (Water Soluble / Non Toxic) YES
Motor Fill Solution Water + Propylene Glycol
Motor Top End Bell Material 304SS Cover painted cast iron
Shaft Slinger Material Nitrile Rubber (NBR)
Stator Fill Resin
Stator/ Motor Shell Material Stainless Steel
Winding Material Copper

Dimensions

Motor Length 32.18 "
Product Weight 77 lb
Product Weight with Pack 77 lb
Carton Length 50 "
Carton Width 6.5 "
Carton Height 6.25 "
Shaft End Spline

Other

Drinking Water Agency Approvals ANSI/NSF Standard 61
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Applications These motors are built for dependable operation in 4” diameter or larger water wells.