2247022604G 4C1F(3HP,230,60,W)900LB

The Franklin 4-inch Super Stainless motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers 4-inch motors in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.

Item: 2247022604G
Model: 4C1F(3HP,230,60,W)900LB
Type Water Well

Ratings

HP 3 hp
Frequency 60 Hz
Phases Single-Phase
Amps - Full Load 13.3 A
Amps - Service Factor 13.3 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 900 lb
Lead Length 8 ft
Motor Submersible
Continuous Duty Yes
Efficiency Service Factor Load [%] 75.00 %
Lead Wire Size AWG #14
Lead Retainer Method Lead Jam Nut
Motor Insulation Classification B
Poles 2
S.F. 1.15
Lead Yes
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 900 lb
Rotation Counter clockwise facing the shaft

Materials of Construction

Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Diaphragm Material Nitrile Rubber (NBR)
Motor Construction Design Super Stainless
Motor Fill Solution (Water Soluble / Non Toxic) YES
Motor Fill Solution Water + Propylene Glycol
Motor Top End Bell Material 304SS Cover painted cast iron
Shaft Slinger Material Nitrile Rubber (NBR)
Stator Fill Resin
Stator/ Motor Shell Material Stainless Steel
Winding Material Copper

Dimensions

Motor Length 19.06 "
Product Weight 41 lb
Product Weight with Pack 41 lb
Carton Length 24.75 "
Carton Width 4.25 "
Carton Height 4.38 "
Shaft End Spline

Other

Drinking Water Agency Approvals ANSI/NSF Standard 61
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing
Applications These motors are built for dependable operation in 4” diameter or larger water wells.