93809010 – 90SDQP-3.0HP-N4
The SubDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system.
| Item: | 93809010 |
| Model: | 90SDQP-3.0HP-N4 |
| Type | Water Well |
Ratings |
|
| HP 60Hz | 3 hp |
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Service Factor | 10.9 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 900 lb |
| Motor | Submersible |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 78.00 % |
| Hz | 50/60 Hz |
| Input Phase | Single-Phase |
| Output Phase | Three-Phase |
| Input Power Factor | 1 |
| Input Power Max | 4600 W |
| Input voltage single phase (VAC) | 208/230 VAC |
| Lead Retainer Method | Lead Jam Nut |
| Maximum Output Amps (3 Phase) | 10.9 @ 230 VAC |
| Minimum Output Frequency | 30Hz (SUB) |
| Maximum Output Frequency | 80Hz (SUB) |
| Maximum Output Current | 10.9 A |
| Output Voltage - 3 Phase (VAC) | 230 VAC |
| S.F. | 1.15 |
Operation |
|
| Flow | 90 gpm |
| Shut Off 60 Hz | 170 ft |
| Stages | 6 |
| Pressure Sensor Included | Yes |
| Pressure Transducer Included | NO |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 900 lb |
| Enclosure Rating | Type 4 |
| Minimum Operating Temperature | -13 °F |
| Maximum Operating Temperature | 122 °F |
| Pressure Transducer Included | NO |
| Storage Temperature | -13° to 144 °F (-25° to 65 °C) |
| Submersible Use | Yes |
| Minimum Immersion Depth | 120 " |
Liquid |
|
| Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Body Material | AISI 304 Stainless Steel |
| Discharge Head Material | Stainless Steel |
| Motor Bracket Material | Stainless Steel |
| Check Valve | No |
| Intake Screen Material | Stainless Steel |
| Thrust Bearing | Kingsbury Type |
| Seal | Lip Seal Ring |
| Lead Insulation Material | XLPE |
| Cable Guard Material | Stainless Steel |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Flow Switch Included | NO |
| Motor Construction Design | Super Stainless |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | Stainless Steel |
| Shelf Life | 1.5 year |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 2 " |
| Motor Diameter - Physical Diameter | 95.25 mm |
| Diameter With Cable Guard | 3.9 " |
| Motor Length | 20.18 " |
| Pump Length | 23.4 " |
| Carton Length | 29.63 " |
| Carton Width | 11.94 " |
| Carton Height | 22.63 " |
| Shaft End | Spline |
Other |
|
| Component Drive Part Number | 5870204154 |
| Component Motor Part Number | 2343162605G |
| Component Pump Part Number | 93659006 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | cUL Listed / UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
