93806016 60SDQP-3.0HP-N4

The SubDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system.

Item: 93806016
Model: 60SDQP-3.0HP-N4
Type Water Well


HP 3 hp
Phases Three-Phase
Amps - Service Factor 10.9 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Motor Submersible
Continuous Duty Yes
Efficiency Service Factor Load [%] 78.00 %
Hz 50/60 Hz
Input Phase Single-Phase
Output Phase Three-Phase
Input Power Factor 1
Input Power Max 4600 W
Input voltage single phase (VAC) 208/230 VAC
Lead Retainer Method Lead Jam Nut
Maximum Output Amps (3 Phase) 10.9 @ 230 VAC
Minimum Output Frequency 30Hz (SUB)
Maximum Output Frequency 80Hz (SUB)
Maximum Output Current 10.9 A
Output Voltage - 3 Phase (VAC) 230 VAC
S.F. 1.15
Flow 60 gpm
Shut Off 206 ft
Stages 7
Pressure Sensor Included Yes
Pressure Transducer Included NO
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating @ 89 F, 30 C 900 lb
Enclosure Rating Type 4
Minimum Operating Temperature -13 °F
Maximum Operating Temperature 122 °F
Pressure Transducer Included NO
Storage Temperature -13° to 144 °F (-25° to 65 °C)
Submersible Use YES


Maximum Fluid Temperature 120 °F

Materials of Construction

Pump Body Material AISI 304 Stainless Steel
Discharge Head Material Stainless Steel
Motor Bracket Material Stainless Steel
Check Valve No
Intake Screen Material Stainless Steel
Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Cable Guard Material Stainless Steel
Diaphragm Material Nitrile Rubber (NBR)
Flow Switch Included NO
Motor Construction Design Super Stainless
Shaft Slinger Material Nitrile Rubber (NBR)
Stator/ Motor Shell Material Stainless Steel
Shelf Life 1.5 year


Discharge Thread FNPT
Discharge Diameter 2 "
Motor Diameter - Physical Diameter 95.25 mm
Diameter With Cable Guard 3.9 "
Motor Length 20.18 "
Pump Length 23.5 "
Product Weight with Pack 83 lb
Carton Length 29.63 "
Carton Width 11.94 "
Carton Height 22.63 "
Minimum Immersion Depth 120 "
Shaft End Spline


Component Drive Part Number 5870204154
Component Motor Part Number 2343162605G
Component Pump Part Number 93656007
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals cUL Listed / UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing