93801511 15SDQP-2.0HP-N4

The SubDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system.

Item: 93801511
Model: 15SDQP-2.0HP-N4
Type Water Well

Ratings

HP 2 hp
Phases Three-Phase
Amps - Service Factor 8.1 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 650 lb
Motor Submersible
Continuous Duty Yes
Efficiency Service Factor Load [%] 76.00 %
Hz 50/60 Hz
Input Phase Single-Phase
Output Phase Three-Phase
Input Power Factor 1
Input Power Max 3800 W
Input voltage single phase (VAC) 208/230 VAC
Lead Retainer Method Lead Jam Nut
Maximum Output Amps (3 Phase) 8.1 @ 230VAC
Minimum Output Frequency 30Hz (SUB)
Maximum Output Frequency 80Hz (SUB)
Maximum Output Current 8.1 A
Output Voltage - 3 Phase (VAC) 230 VAC
S.F. 1.25
Flow 15 gpm
Shut Off 60 Hz 590 ft
Stages 8
Pressure Sensor Included Yes
Pressure Transducer Included NO
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 650 lb
Enclosure Rating Type 4
Minimum Operating Temperature -13 °F
Maximum Operating Temperature 122 °F
Pressure Transducer Included NO
Storage Temperature -13° to 144 °F (-25° to 65 °C)
Submersible Use Yes
Minimum Immersion Depth 120 "

Liquid

Maximum Fluid Temperature 122 °F

Materials of Construction

Pump Body Material AISI 304 Stainless Steel
Discharge Head Material Stainless Steel
Impeller Material Celcon
Motor Bracket Material Stainless Steel
Check Valve Yes
Intake Screen Material Stainless Steel
Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Cable Guard Material Stainless Steel
Diaphragm Material Nitrile Rubber (NBR)
Flow Switch Included NO
Motor Construction Design Super Stainless
Shaft Slinger Material Nitrile Rubber (NBR)
Stator/ Motor Shell Material Stainless Steel
Shelf Life 1.5 year

Dimensions

Discharge Threaded - FNPT
Discharge Diameter 1.25 "
Motor Diameter - Physical Diameter 95.25 mm
Diameter With Cable Guard 3.9 "
Motor Length 19.1 "
Pump Length 14.14 "
Product Weight with Pack 64 lb
Carton Length 29.63 "
Carton Width 11.94 "
Carton Height 22.63 "
Shaft End Spline

Other

Component Drive Part Number 5870204104
Component Motor Part Number 2343159204GS
Component Pump Part Number 93871510
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals cUL Listed / UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing