93811510 – 15FA05S4-2W230
The standard FPS Tri-Seal 4-inch submersible well pump features the new TRI-SEAL floating stage system. This new stage system for the submersible well pump improves efficiency and protects against wear when pumping abrasives (sand).
| Item: | 93811510 |
| Model: | 15FA05S4-2W230 |
Ratings |
|
| HP 60Hz | 1/2 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Service Factor | 6 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 2-Wire |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 60.00 % |
| Input Phase | Single-Phase |
| Lead Retainer Method | Lead Jam Nut |
Operation |
|
| Maximum Flow Rate - 60 Hz | 18 gpm |
| Minimum Flow Rate - 60 Hz | 8 gpm |
| Flow | 15 gpm |
| Shut Off 60 Hz | 170 ft |
| Stages | 4 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
Liquid |
|
| Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Body Material | AISI 304 Stainless Steel |
| Impeller Material | Acetal |
| Motor Bracket Material | Stainless Steel |
| Check Valve | Yes |
| Discharge Material | Stainless Steel |
| Intake Screen Material | Stainless Steel |
| Thrust Bearing | Kingsbury Type |
| Lead Insulation Material | XLPE |
| Diffuser Material | Noryl with 30% Fiberglass |
| Cable Guard Material | Stainless Steel |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Product Length | 20.15 " |
| Diameter With Cable Guard | 3.9 " |
| Motor Length | 9.51 " |
| Pump Length | 10.64 " |
| Product Weight | 25 lb |
| Pump Diameter | 3.9 " |
Other |
|
| Component Motor Part Number | 2445059004GS |
| Component Pump Part Number | 93821505 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | Groundwater pumping in clean water well systems 4" diameter and greater |
