2630165331 – 8PM-93-460-120-DOL-1R-PE2
| Item: | 2630165331 |
| Model: | 8PM-93-460-120-DOL-1R-PE2 |
| Type | Sand Fighter |
Ratings |
||
| Frequency | 120 Hz | |
| Phases | Three-Phase | |
| Amps - Full Load | 135 A | |
| Amps - Service Factor | 160 A | |
| Volts | 460 VAC | |
| Voltage Tolerance (%) | -10.0% / +10.0% | |
| Wire | 3-Wire | |
| Thrust Bearing Rating | 10000 lb | |
| Lead Length | 21 ft | |
| Motor | Rewindable | |
| Continuous Duty | Yes | |
| Efficiency Service Factor Load [%] | 93.00 % | |
| Lead Wire Size | 25 mm² | |
| Motor Insulation Classification | Y | |
| Poles | 4 | |
| Service Factor - 120Hz | 1.15 | |
| VFD Required | YES | |
| HP | 125 hp | |
| Minimum Cooling Flow | 1.5 ft/sec | |
| Motor Ambient Temperature Rating Nominal | 86 °F | |
| Thrust Bearing Rating | 10000 lb | |
| Motor Adapter | Double flange | |
| Rotation | Counter clockwise facing the shaft | |
| SubTrol Heat Sensor | NO | No |
Materials of Construction |
|
| Motor Shaft End - Material | Stainless Steel 1.4462 |
| Thrust Bearing | Kingsbury |
| Seal | Mechanical Seal SiC/SiC |
| Diaphragm Material | Ethylene-Propylene-Diene (EPDM) |
| Motor Bottom End Bell Material | Cast Iron with E-Coat Paint |
| Motor Fill Solution (Water Soluble / Non Toxic) | YES |
| Motor Fill Solution | FES93 |
| Motor Top End Bell Material | Cast Iron with E-Coat Paint |
| Shaft Slinger Material | EPDM |
| Stator Ends Material | Carbon Steel |
| Stator Fill | Water/Propyleneglycol |
| Stator/ Motor Shell Material | 304SS |
| Winding Material | Copper/ PE2/PA |
Dimensions |
|
| Motor Diameter - Physical Diameter | 7.70" |
| Motor Length | 51.81 " |
| Product Weight | 375 lb |
| Product Weight with Pack | 437 lb |
| Shaft End | Spline |
Other |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
