Non-Clog Pumps

4NC Series 4-Inch Discharge Non-Clog Pump

Non-Clog Pumps

4NC Series 4-Inch Discharge Non-Clog Pump

The FPS NC Series Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly wastewater transfer solution with flows up to 610 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NC Series also comes fully supported by an industry-leading team of Technical Support and Service professionals.

 

FE_Select_Logo_Tagline_BLK.psd

Available on FE Select

Size. Configure. Quote. Input your performance requirements or specs, and our industry-leading online tool will help you find the right Franklin Electric product for the job.

Size with FE Select US  |  Size with FE Select CA

Overview


Features & Benefits

  • Simplified On-Site Maintenance: Field adjustable wear plate provides clearance between the impeller and volute for simplified maintenance, minimizing operational downtime while maximizing profit without the need and additional cost of a replaceable wear ring
  • Up To 6 Times Longer Seal Life: Factory standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance than carbon versus ceramic commonly used for both seals
  • Factory standard exclusion seal provides a first line of defense. If the exclusion seal and first mechanical seal is breached, the Seal Fail probe will send a signal to the control panel providing an alert for service.
  • Premium Heat & Chemical Resistance: Motor enclosure sealing system utilizes Fluroelastomer (FKM) O-Rings to offer added chemical and temperature resistance
  • Corrosion Resistance Comes Standard: All castings are powder coated, while ductile iron casted impellers provide added corrosion resistance and are less brittle when handling rigid debris versus competitive cast iron versions
  • Fully Supported: Comes fully supported by an industry-leading team of Technical Support and Service professionals
  • All 1-Phase Non-Clog Pumps require a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

Specifications

  • 4" horizontal flange discharge (125# ANSI flange)
  • Maximum solids size: 3"
  • Power cable - 8/4 -type SOOW– 30' & 50'
  • Sensor cable – 16/4 – type SOOW – 30’ & 50'
  • Class F motor insulation
  • Continuous duty motor (104 °F maximum)
  • Lower double row ball bearing
  • 300 series SST motor shaft
  • Seal-fail indication probe
  • 300 series SST fasteners
  • Cast iron motor housing, volute, and seal chamber
  • Fluoroelastomer (FKM) sealing system for motor enclosure
  • Mechanical seals: Dual silicon carbide
  • Additional exclusion seal
  • Agency listing: cCSAus
  • *The 1-Phase Non-Clog Pump requires a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

Applications

  • Used for a multitude of purposes in commercial and industrial applications such as: sewage, effluent, irrigation, and general dewatering.

Specifications


4NC Curve.svg

Order Information


Non-Clog Single Phase Model

Item Model HP Volts Discharge Amps - Full Load Lead Length
87110382-00 4NC-323P1-170 3 hp 230 VAC 4 " 24 A 30 ft
87110382-01 4NC-323P1-170 3 hp 230 VAC 4 " 24 A 50 ft
87110383-00 4NC-323P1-160 3 hp 230 VAC 4 " 21.5 A 30 ft
87110383-01 4NC-323P1-160 3 hp 230 VAC 4 " 21.5 A 50 ft
87110384-00 4NC-323P1-146 3 hp 230 VAC 4 " 17.5 A 30 ft
87110384-01 4NC-323P1-146 3 hp 230 VAC 4 " 17.5 A 50 ft
87110394-00 4NC-523P1-176 5 hp 230 VAC 4 " 30 A 30 ft
87110394-01 4NC-523P1-176 5 hp 230 VAC 4 " 30 A 50 ft
87110395-00 4NC-523P1-170 5 hp 230 VAC 4 " 24 A 30 ft
87110395-01 4NC-523P1-170 5 hp 230 VAC 4 " 24 A 50 ft

Non-Clog Three Phase Model

Item Model HP Volts Discharge Amps - Full Load Lead Length
87110385-00 4NC-323P3-170 3 hp 230 VAC 4 " 30 ft
87110385-01 4NC-323P3-170 3 hp 230 VAC 4 " 50 ft
87110386-00 4NC-323P3-160 3 hp 230 VAC 4 " 30 ft
87110386-01 4NC-323P3-160 3 hp 230 VAC 4 " 50 ft
87110387-00 4NC-323P3-146 3 hp 230 VAC 4 " 30 ft
87110387-01 4NC-323P3-146 3 hp 230 VAC 4 " 50 ft
87110388-00 4NC-346P3-170 3 hp 460 VAC 4 " 7 A 30 ft
87110388-01 4NC-346P3-170 3 hp 460 VAC 4 " 7 A 50 ft
87110389-00 4NC-346P3-160 3 hp 460 VAC 4 " 6.5 A 30 ft
87110389-01 4NC-346P3-160 3 hp 460 VAC 4 " 6.5 A 50 ft
87110390-00 4NC-346P3-146 3 hp 460 VAC 4 " 5.5 A 30 ft
87110390-01 4NC-346P3-146 3 hp 460 VAC 4 " 5.5 A 50 ft
87110391-01 4NC-357P3-170 3 hp 575 VAC 4 " 5.5 A 50 ft
87110392-01 4NC-357P3-160 3 hp 575 VAC 4 " 5 A 50 ft
87110393-01 4NC-357P3-146 3 hp 575 VAC 4 " 4.5 A 50 ft
87110398-00 4NC-523P3-182 5 hp 230 VAC 4 " 30 ft
87110398-01 4NC-523P3-182 5 hp 230 VAC 4 " 50 ft
87110399-00 4NC-523P3-170 5 hp 230 VAC 4 " 30 ft
87110399-01 4NC-523P3-170 5 hp 230 VAC 4 " 50 ft
87110402-00 4NC-546P3-182 5 hp 460 VAC 4 " 9 A 30 ft
87110402-01 4NC-546P3-182 5 hp 460 VAC 4 " 9 A 50 ft
87110403-00 4NC-546P3-170 5 hp 460 VAC 4 " 7 A 30 ft
87110403-01 4NC-546P3-170 5 hp 460 VAC 4 " 7 A 50 ft
87110406-01 4NC-557P3-182 5 hp 575 VAC 4 " 7 A 50 ft
87110407-01 4NC-557P3-170 5 hp 575 VAC 4 " 5.5 A 50 ft
87110410-00 4NC-7523P3-190 7.5 hp 230 VAC 4 " 30 ft
87110410-01 4NC-7523P3-190 7.5 hp 230 VAC 4 " 50 ft
87110411-00 4NC-7523P3-182 7.5 hp 230 VAC 4 " 30 ft
87110411-01 4NC-7523P3-182 7.5 hp 230 VAC 4 " 50 ft
87110414-00 4NC-7546P3-190 7.5 hp 460 VAC 4 " 11 A 30 ft
87110414-01 4NC-7546P3-190 7.5 hp 460 VAC 4 " 11 A 50 ft
87110415-00 4NC-7546P3-182 7.5 hp 460 VAC 4 " 10.5 A 30 ft
87110415-01 4NC-7546P3-182 7.5 hp 460 VAC 4 " 10.5 A 50 ft
87110418-01 4NC-7557P3-190 7.5 hp 575 VAC 4 " 8.5 A 50 ft
87110419-01 4NC-7557P3-182 7.5 hp 575 VAC 4 " 8 A 50 ft
87110422-00 4NC-1023P3-206 10 hp 230 VAC 4 " 30 ft
87110422-01 4NC-1023P3-206 10 hp 230 VAC 4 " 50 ft
87110423-00 4NC-1023P3-190 10 hp 230 VAC 4 " 30 ft
87110423-01 4NC-1023P3-190 10 hp 230 VAC 4 " 50 ft
87110426-00 4NC-1046P3-206 10 hp 460 VAC 4 " 13 A 30 ft
87110426-01 4NC-1046P3-206 10 hp 460 VAC 4 " 13 A 50 ft
87110427-00 4NC-1046P3-190 10 hp 460 VAC 4 " 11 A 30 ft
87110427-01 4NC-1046P3-190 10 hp 460 VAC 4 " 11 A 50 ft
87110430-01 4NC-1057P3-206 10 hp 575 VAC 4 " 10.5 A 50 ft

Parts & Accessories


Non-Clog Starter Kit

Item Model Description
520851 KIT,CAPACITOR,REPLACEMENT NON-CLOG 1PH 230V

Non-Clog Accessories

Item Model Description
115930104 FPSBEA400,4.00" BASE ELBOW
115930126 4" Flange to 4" Threaded Elbow Kit