Non-Clog Pumps

3NC Series 3-Inch Discharge Non-Clog Pump

Non-Clog Pumps

3NC Series 3-Inch Discharge Non-Clog Pump

The FPS NC Series Non-Clog Pumps are available in single- and three-phase power options to provide a rugged, maintenance-friendly wastewater transfer solution with flows up to 610 gpm. Featuring a field adjustable wear plate and factory standard dual silicon carbide mechanical seals, the NC Series also comes fully supported by an industry-leading team of Technical Support and Service professionals.

 

FE_Select_Logo_Tagline_BLK.psd

Available on FE Select

Size. Configure. Quote. Input your performance requirements or specs, and our industry-leading online tool will help you find the right Franklin Electric product for the job.

Size with FE Select US  |  Size with FE Select CA

Overview


Features & Benefits

  • Simplified On-Site Maintenance: Field adjustable wear plate provides clearance between the impeller and volute for simplified maintenance, minimizing operational downtime while maximizing profit without the need and additional cost of a replaceable wear ring
  • Up To 6 Times Longer Seal Life: Factory standard dual silicon carbide mechanical seals have low thermal expansion and higher abrasion resistance than carbon versus ceramic commonly used for both seals
  • Factory standard exclusion seal provides a first line of defense. If the exclusion seal and first mechanical seal is breached, the Seal Fail probe will send a signal to the control panel providing an alert for service.
  • Premium Heat & Chemical Resistance: Motor enclosure sealing system utilizes Fluroelastomer (FKM) O-Rings to offer added chemical and temperature resistance
  • Corrosion Resistance Comes Standard: All castings are powder coated, while ductile iron casted impellers provide added corrosion resistance and are less brittle when handling rigid debris versus competitive cast iron versions
  • Fully Supported: Comes fully supported by an industry-leading team of Technical Support and Service professionals
  • All 1-Phase Non-Clog Pumps require a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

Specifications

  • 3" horizontal flange discharge (125# ANSI flange)
  • Maximum solids size: 2.5"
  • Power cable - 8/4 -type SOOW– 30' & 50'
  • Sensor cable – 16/4 – type SOOW – 30’ & 50'
  • Class F motor insulation
  • Continuous duty motor (104 °F maximum)
  • Lower double row ball bearing
  • 300 series SST motor shaft
  • Seal-fail indication probe
  • 300 series SST fasteners
  • Cast iron motor housing, volute, and seal chamber
  • Fluoroelastomer (FKM) sealing system for motor enclosure
  • Mechanical seals: Dual silicon carbide
  • Additional exclusion seal
  • Agency listing: cCSAus
  • *The 1-Phase Non-Clog Pump requires a specific starter kit from FPS, matched to the pump for proper operation and third-party approval.

Applications

  • Used for a multitude of purposes in commercial and industrial applications such as: sewage, effluent, irrigation, and general dewatering.

Specifications


3NC Curve.svg

Order Information


Non-Clog Single Phase Model

Item Model HP Volts Discharge Amps - Full Load Lead Length
87109896-00 3NC-323P1-184 3 hp 230 VAC 3 " 25 A 30 ft
87109896-01 3NC-323P1-184 3 hp 230 VAC 3 " 25 A 50 ft
87109897-00 3NC-323P1-172 3 hp 230 VAC 3 " 22.5 A 30 ft
87109897-01 3NC-323P1-172 3 hp 230 VAC 3 " 22.5 A 50 ft
87109898-00 3NC-323P1-160 3 hp 230 VAC 3 " 19 A 30 ft
87109898-01 3NC-323P1-160 3 hp 230 VAC 3 " 19 A 50 ft
87110366-00 3NC-523P1-190 5 hp 230 VAC 3 " 28.5 A 30 ft
87110366-01 3NC-523P1-190 5 hp 230 VAC 3 " 28.5 A 50 ft
87110367-00 3NC-523P1-184 5 hp 230 VAC 3 " 25 A 30 ft
87110367-01 3NC-523P1-184 5 hp 230 VAC 3 " 25 A 50 ft

Non-Clog Three Phase Model

Item Model HP Volts Discharge Amps - Full Load Lead Length
87109899-00 3NC-323P3-184 3 hp 230 VAC 3 " 30 ft
87109899-01 3NC-323P3-184 3 hp 230 VAC 3 " 50 ft
87110358-00 3NC-323P3-172 3 hp 230 VAC 3 " 30 ft
87110358-01 3NC-323P3-172 3 hp 230 VAC 3 " 50 ft
87110359-00 3NC-323P3-160 3 hp 230 VAC 3 " 30 ft
87110359-01 3NC-323P3-160 3 hp 230 VAC 3 " 50 ft
87110360-00 3NC-346P3-184 3 hp 460 VAC 3 " 7.5 A 30 ft
87110360-01 3NC-346P3-184 3 hp 460 VAC 3 " 7.5 A 50 ft
87110361-00 3NC-346P3-172 3 hp 460 VAC 3 " 6.5 A 30 ft
87110361-01 3NC-346P3-172 3 hp 460 VAC 3 " 6.5 A 50 ft
87110362-00 3NC-346P3-160 3 hp 460 VAC 3 " 6 A 30 ft
87110362-01 3NC-346P3-160 3 hp 460 VAC 3 " 6 A 50 ft
87110363-01 3NC-357P3-184 3 hp 575 VAC 3 " 6 A 50 ft
87110364-01 3NC-357P3-172 3 hp 575 VAC 3 " 5.5 A 50 ft
87110365-01 3NC-357P3-160 3 hp 575 VAC 3 " 4.5 A 50 ft
87110370-00 3NC-523P3-196 5 hp 230 VAC 3 " 30 ft
87110370-01 3NC-523P3-196 5 hp 230 VAC 3 " 50 ft
87110371-00 3NC-523P3-184 5 hp 230 VAC 3 " 30 ft
87110371-01 3NC-523P3-184 5 hp 230 VAC 3 " 50 ft
87110374-00 3NC-546P3-196 5 hp 460 VAC 3 " 9.5 A 30 ft
87110374-01 3NC-546P3-196 5 hp 460 VAC 3 " 9.5 A 50 ft
87110375-00 3NC-546P3-184 5 hp 460 VAC 3 " 8 A 30 ft
87110375-01 3NC-546P3-184 5 hp 460 VAC 3 " 8 A 50 ft
87110378-01 3NC-557P3-196 5 hp 575 VAC 3 " 7.5 A 50 ft
87110379-01 3NC-557P3-184 5 hp 575 VAC 3 " 6 A 50 ft

Parts & Accessories


Non-Clog Starter Kit

Item Model Description
520851 KIT,CAPACITOR,REPLACEMENT NON-CLOG 1PH 230V

Non-Clog Accessories

Item Model Description
115930103 FPSBEA300H,3.00" HORZ BASE ELBOW,W/NPT DISCH ELBOW
87109788-00 PEDESTAL ROSCADO FWS 3" NPT
87109789-00 Bolt-On 3" Elbow, NPT Discharge
87109916-00 3.00" FLANGED BASE ELBOW SINGLE RAIL