93805586C 60SDQP-3.0HP-3RC

The SubDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system.

Item: 93805586C
Model: 60SDQP-3.0HP-3RC
Type Water Well

Ratings

HP 3 hp
Frequency 30-60 Hz
Phases Three-Phase
Amps - Service Factor 10.9 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Motor Submersible
Continuous Duty Yes
Efficiency Service Factor Load [%] 78.00 %
Hz 50/60 Hz
Input Phase Single-Phase
Output Phase Three-Phase & Single-Phase 3-Wire
Input Power Factor 0.9500
Input Power Max 4200 W
Input voltage single phase (VAC) 208/230 VAC
Lead Retainer Method Lead Jam Nut
Minimum Motor HP (1 Phase, 3 Wire) 0.5 @ 230 VAC
Maximum Motor HP (1 Phase, 3 Wire) 2 @ 230 VAC
Minimum Output Amps(1 Phase, 3 Wire) 2.0 @ 230VAC
Maximum Output Amps (1 Phase 3 Wire) 13.2 @ 230VAC
Minimum Output Amps (3 Phase) 2.0A @ 230 VAC
Maximum Output Amps (3 Phase) 10.9 @ 230 VAC
Minimum Output Frequency 15Hz (CEN), 30Hz (SUB)
Maximum Output Frequency 60Hz (CEN), 80Hz (SUB)
Maximum Output Current 10.9 A
Output Voltage - 1 Phase, 3 Wire (VAC) 230 VAC
Output Voltage - 3 Phase (VAC) 230 VAC
S.F. 1.15
Maximum Flow Rate - 60 Hz 94 gpm
Flow 60 gpm
Shut Off 78.74 ft
Minimum Head - 60 Hz 16.4 ft
Shut Off 206 ft
Stages 6
Pressure Sensor Included No
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating @ 89 F, 30 C 900 lb
Minimum Operating Temperature -13 °F
Pressure Transducer Included YES
Storage Temperature -13° to 144 °F (-25° to 65 °C)
Submersible Use YES

Liquid

Maximum Fluid Temperature 50 °C

Materials of Construction

Pump Body Material Stainless Steel
Discharge Head Material Stainless Steel
Impeller Material Noryl
Motor Bracket Material Stainless Steel
Check Valve No
Intake Screen Material Stainless Steel
Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Diffuser Material Noryl with 30% Fiberglass
Cable Guard Material Stainless Steel
Diaphragm Material Nitrile Rubber (NBR)
Enclosure Rating Type 3R
Flow Switch Included NO
Motor Construction Design Super Stainless
Shaft Slinger Material Nitrile Rubber (NBR)
Stator/ Motor Shell Material Stainless Steel
Shelf Life 1.5000 YEAR

Dimensions

Discharge Thread FNPT
Discharge FNPT
Discharge Diameter 2 "
Motor Diameter - Physical Diameter 95.25 mm
Diameter With Cable Guard 3.9 "
Motor Length 20.18 "
Pump Length 23.5 "
Product Weight with Pack 70 lb
Carton Width 10.31 "
Carton Height 19.38 "
Carton Length 29.63 "
Minimum Immersion Depth 120 "
Shaft End Spline

Other

Component Motor Part Number 2343162605G
Component Pump Part Number 93656007
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals cUL Listed / UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing