93975235C 10-3WQP-2.0HP-3RC

The SubDrive QuickPAK is a popular system-solution package designed to simplify the installation of a constant pressure system.

Item: 93975235C
Model: 10-3WQP-2.0HP-3RC
Type Water Well

Ratings

HP 2 hp
Phases Single-Phase
Amps - Service Factor 13.2 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 650 lb
Motor Submersible
Continuous Duty Yes
Efficiency Service Factor Load [%] 74.00 %
Hz 50/60 Hz
Input Phase Single-Phase
Output Phase Three-Phase & Single-Phase 3-Wire
Input Power Factor 0.95
Input Power Max 4200 W
Input voltage single phase (VAC) 230 VAC
Lead Retainer Method Lead Jam Nut
Minimum Motor HP (1 Phase, 3 Wire) 0.5 @ 230 VAC
Maximum Motor HP (1 Phase, 3 Wire) 2 @ 230 VAC
Minimum Output Amps (1 Phase, 3 Wire) 2.0 @ 230VAC
Maximum Output Amps (1 Phase 3 Wire) 13.2 @ 230VAC
Minimum Output Amps (3 Phase) 2.0A @ 230 VAC
Minimum Output Frequency 15Hz (CEN), 30Hz (SUB)
Maximum Output Frequency 60Hz (CEN), 80Hz (SUB)
Maximum Output Current 16 A
Output Voltage - 1 Phase, 3 Wire (VAC) 230 VAC
Output Voltage - 3 Phase (VAC) 230 VAC
S.F. 1.25
Flow 10 gpm
Shut Off 60 Hz 770 ft
Stages 18
Pressure Sensor Included No
Pressure Transducer Included YES
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 650 lb
Enclosure Rating Type 3R
Minimum Operating Temperature -13 °F
Maximum Operating Temperature 122 °F
Pressure Transducer Included YES
Storage Temperature -13° to 144 °F (-25° to 65 °C)

Liquid

Maximum Fluid Temperature 122 °F

Materials of Construction

Pump Body Material AISI 304 Stainless Steel
Discharge Head Material Stainless Steel
Impeller Material Acetal
Motor Bracket Material Stainless Steel
Check Valve Yes
Intake Screen Material Stainless Steel
Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Cable Guard Material Stainless Steel
Diaphragm Material Nitrile Rubber (NBR)
Flow Switch Included NO
Motor Construction Design Super Stainless
Shaft Slinger Material Nitrile Rubber (NBR)
Stator/ Motor Shell Material Stainless Steel
Shelf Life 1.5 year

Dimensions

Discharge Thread FNPT
Discharge Diameter 1.25 "
Diameter With Cable Guard 3.9 "
Motor Length 15.12 "
Pump Length 25.26 "
Carton Length 29.63 "
Carton Width 10.31 "
Carton Height 19.38 "
Shaft End Spline

Other

Component Drive Part Number 5870205313C
Component Motor Part Number 2243019204GS
Component Pump Part Number 93871020
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals cUL Listed / UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing