Ratings |
|
| HP 60Hz | 1/2 hp |
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 10.3 A |
| Amps - Service Factor | 13.3 A |
| Volts | 48 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 300 lb |
| Lead Length | 4 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Efficiency [η] - Full Load (%) | 63.80 |
| Efficiency Service Factor Load [%] | 68.40 % |
| Protection [IP] | IP66 |
| Hz | DC Input |
| Input Phase | DC Input |
| Output Phase | Three-Phase |
| Input Power Factor | 1 |
| Input Power Max | 600 W |
| Input Voltage DC | 40-110 VDC |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Lead Jam Nut |
| Maximum Motor HP (DC Input) | 1/2 HP |
| Minimum Output Frequency | 20Hz |
| Maximum Output Frequency | 60Hz |
| Motor Efficiency | 63.8 |
| Maximum Output Current | 9.8 A |
| Output Voltage - 3 Phase (VAC) | 48 VAC |
| Poles | 2 |
| S.F. | 1.6 |
| Service Factor - 50Hz | 1 |
Operation |
|
| Flow | 5 gpm |
| Shut Off | 201 ft |
| Shut Off 60 Hz | 390 ft |
| Stages | 18 |
| Switch | INLINE FLOW SWITCH, C25 NPT C25-B-A-B-NPT |
| Pressure Sensor Included | No |
| Pressure Transducer Included | NO |
| Motor NEMA Frame Type | 4 |
| Motor Cooling | Water |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 300 lb |
| Enclosure Rating | Type 4 |
| Minimum Operating Temperature | -13 °F |
| Maximum Operating Temperature | 122 °F |
| Pressure Transducer Included | NO |
| Rotation | Counter clockwise facing the shaft |
| Storage Temperature | -13° to 144 °F (-25° to 65 °C) |
| Submersible Use | Yes |
| Temperature Rating | 86 °F |
| Winding Resistance (Main Winding) | 0.35 - 0.43 |
| Minimum Immersion Depth | 120 " |
Liquid |
|
| Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Body Material | AISI 304 Stainless Steel |
| Discharge Head Material | Stainless Steel |
| Impeller | Closed |
| Impeller Material | Celcon |
| Motor Bracket Material | Stainless Steel |
| Check Valve | Yes |
| Check Valve Material | Plastic |
| Discharge Material | Stainless Steel AISI 304 |
| Intake Screen Material | Stainless Steel |
| Thrust Bearing | Kingsbury Type |
| Seal | Lip Seal Ring |
| Lead Insulation Material | XLPE |
| Diffuser Material | Noryl with 30% Fiberglass |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Flow Switch Included | NO |
| Motor Construction Design | Super Stainless |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | Stainless Steel |
| Suction Material | Stainless Steel AISI 304 |
| Winding Material | Copper |
| Shelf Life | 1.5 year |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Diameter With Cable Guard | 3.75 " |
| Motor Length | 9.5 " |
| Product Weight | 56 lb |
| Product Weight with Pack | 55 lb |
| Carton Length | 29.38 " |
| Carton Width | 11 " |
| Carton Height | 15.38 " |
| Pump Diameter | 3.75 " |
| Shaft End | Spline |
Other |
|
| List Accessories Included | INLINE FLOW SWITCH, C25 NPT C25-B-A-B-NPT - Part Number: 226014102 CABLE, PRESSURE SWITCH 10M - Part Number: 225533103 |
| Minimum Order Quantity | 1 |
| Component Drive Part Number | 581011100984-SP050HP |
| Component Motor Part Number | 2349049204GS |
| Component Pump Part Number | 96320500 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | cUL Listed / UL |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Applications | Solar; Renewable energy; Water Well |
| Repair Kit Available | Yes |
