97180475107 – 475SR75F86-0766
The SR Series submersible turbine pump is designed specifically to meet a variety of applications. With stainless steel impellers and diffusers, a stainless steel shell to maintain alignment, and heavy-investment cast stainless steel suction and discharge brackets, the SR Series submersible turbine pump is equipped to operate efficiently and handle the most demanding conditions.
| Item: | 97180475107 |
| Model: | 475SR75F86-0766 |
Ratings |
||
| HP | 75 hp | |
| Frequency | 60 Hz | |
| Continuous Duty | No | |
| Flow | 475 gpm | |
| Shut Off 60 Hz | 731.63 ft | |
| Stages | 7 | |
| Maximum Allowable Amount of Sand | 100 ppm | |
| Pump Efficiency | 80.0 % | |
| Submersible Use | No | |
| SubTrol Heat Sensor | NO | No |
| Temperature Rating | 140 °F | |
Materials of Construction |
|
| Impeller Material | Stainless Steel AISI 304 |
| Motor Bracket Material | Stainless Steel AISI 304 |
| Check Valve | Yes |
| Check Valve Material | Stainless Steel AISI 316 |
| Discharge Material | Stainless Steel AISI 304 |
| Intake Screen Material | Stainless Steel AISI 316 |
| Coupling Material | Stainless Steel AISI 431/329 1.4057/1.4460 |
| Diffuser Material | Stainless Steel AISI 304 |
| Cable Guard Material | Stainless Steel AISI 316 |
| Bowl Material | 304 SS |
| Motor Fill Solution (Water Soluble / Non Toxic) | NO |
| Pump Shaft Material | Stainless Steel AISI 431 |
Dimensions |
|
| Discharge Thread | FNPT |
| Discharge Diameter | 6 " |
| Diameter With Cable Guard | 7.34 " |
| Pump Length | 50.16 " |
| Product Weight | 123.5 lb |
| Pump Bracket | 6 " |
Other |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
