2363148120 6C3F(20HP,460/230,6,W)SF

Franklin's 6-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. These motors provide large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.

Item: 2363148120
Model: 6C3F(20HP,460/230,6,W)SF
Type Sand Fighter

Ratings

HP 20 hp
Frequency 60 Hz
Phases Three-Phase
Amps - Full Load 26.9 A
Amps - Service Factor 30.3 A
Volts 230 VAC / 460 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Motor Connection DOL
Thrust Bearing Rating 3500 lb
Lead Length 13 ft
Motor Encapsulated
Continuous Duty Yes
Efficiency Service Factor Load [%] 82.00 %
Protection [IP] IP68
Lead Wire Size AWG #8
Lead Retainer Method Lead Jam Nut
Motor Insulation Classification F
Poles 2
S.F. 1.15
Motor Cooling Water
Minimum Cooling Flow .50 ft/sec
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 3500 lb
Motor Adapter Double flange
Rotation Counter clockwise facing the shaft
SubTrol Heat Sensor NO No

Materials of Construction

Motor Shaft End - Material 304SS
Thrust Bearing Kingsbury
Seal Mechanical Seal SiC/SiC
Lead Insulation Material Overmolded
Diaphragm Material Nitrile Rubber (NBR)
Motor Bottom End Bell Material Cast Iron with E-Coat Paint
Motor Fill Solution (Water Soluble / Non Toxic) YES
Motor Fill Solution FES91
Motor Top End Bell Material Cast Iron with E-Coat Paint
Shaft Slinger Material Nitrile Rubber (NBR)
Stator Ends Material Carbon Steel
Stator Fill Resin
Stator/ Motor Shell Material 300 Series SS
Winding Material Copper

Dimensions

Motor Diameter - Physical Diameter 5.44"
Motor Length 33.5 "
Product Weight 135 lb
Product Weight with Pack 147 lb
Carton Length 37 "
Carton Width 7.25 "
Carton Height 10.5 "
Shaft Diameter 1 "
Shaft End Spline

Other

Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing