AIM Manual

Motor Application » Single-Phase Motors (Page 13)

Single-Phase Motor Specifications

Table 13 Single-Phase Motor Specifications (60 Hz) 3450 rpm
TYPEMOTOR
MODEL
PREFIX
RATINGFULL
LOAD
MAXIMUM
LOAD
WINDING (1)
RES IN OHMS
EFFICIENCY %POWER
FACTOR %
LOCKED
ROTOR
AMPS
KVA
CODE
HPKWVOLTSHZS.F.(2) AMPSWATTS(2) AMPSWATTSM=MAIN RES.
S=START RES.
S.F.F.L. S.F.F.L.
4" 2-WIRE2445041/20.37115601.610670129601.0-1.36256735864.4R
2445051/20.37230601.6567069604.2-5.26256735832.2R
2445073/40.55230601.56.8940813103.0-3.66459746240.7N
24450810.75230601.48.2121010.416002.2-2.76562746348.7N
2443091.51.1230601.310.6177013.122801.5-2.16463837666.2M
4" 3-WIRE2145041/20.37115601.6Y10.0670Y12.0960M1.0-1.36256735850.5M
B10.0B12.0S4.1-5.1
R0R0
2145051/20.37230601.6Y5.0670Y6.0960M4.2-5.26256735823M
B5.0B6.0S16.7-20.5
R0R0
2145073/40.55230601.5Y6.8940Y8.01310M3.0-3.66459746234.2M
B6.8B8.0S10.7-13.1
R0R0
21450810.75230601.4Y8.2121010.41600M2.2-2.76562746341.8L
B8.210.4S9.9-12.1
R0R0
4" 3-WIRE
W/CRC CB
2145051/20.37230601.6Y3.2655Y4.3890M4.2-5.26757908123M
B3.7B4.0S16.7-20.5
R2.0R2.0
2145073/40.55230601.5Y4.4925Y5.71220M3.0-3.66960928434.2M
B5.0B5.2S10.7-13.1
R3.2R3.1
21450810.75230601.4Y5.61160Y8.11490M2.2-2.77064928641.8L
B5.7B6.2S9.9-12.1
R3.4R3.3
4" 3-WIRE214508
w/1 -
1.5 CB
10.75230601.4Y6.61130Y8.01500M2.2-2.77066827243L
B6.6B7.9S9.9-12.1
R1.3R1.3
2243001.51.1230601.3Y10.01620Y11.52080M1.7-2.17069857951.4J
B9.9B11.0S7.5-9.2
R1.3R1.3
22430121.5230601.25Y10.02025Y13.22555M1.8-2.37374959453.1G
B9.3B11.9S5.5-7.2
R2.6R2.6
224302
(3)
32.2230601.15Y14.03000Y17.03400M1.1-1.47575999983.4H
(3)B11.2B12.6S4.0-4.8
R6.1R6.0
22430353.7230601.15Y23.04830Y27.55500M.71-.827877100100129G
(4)B15.9B19.1S1.8-2.2
R11.0R10.8
6"22611053.7230601.15Y23.04910Y27.55570M.55-.6877761009999E
(5)B14.3B17.4S1.3-1.7
R10.8R10.5
2261117.55.5230601.15Y36.57300Y42.18800M.36-.5073749190165F
B34.4B40.5S.88-1.1
R5.5R5.4
226112107.5230601.15Y44.09800Y51.011300M.27-.3376779696204E
B39.5B47.5S.80-.99
R9.3R8.9
2261131511230601.15Y62.013900Y75.016200M.17-.2279809798303E
B52.0B62.5S.68-.93
R17.5R16.9
  • (1) Main winding - yellow to black Start winding - yellow to red
  • (2)
  • Y = Yellow lead - line amps
  • B = Black lead - main winding amps
  • R = Red lead - start or auxiliary winding amps
  • (3) Control Boxes date coded 02C and older have 35 MFD run capacitors. Current values should be
  • Y14.0 @ FL and Y17.0 @ Max Load.
  • B12.2 . . . . B14.5
  • R4.7 . . . . R4.5
  • (4) Control Boxes date coded 01M and older have 60 MFD run capacitors and the current values on a 4" motor will be
  • Y23.0 @ FL - Y27.5 @ Max Load.
  • B19.1 . . . . B23.2
  • R8.0 . . . . R7.8
  • (5) Control Boxes date coded 01M and older have 60 MFD run capacitors and the current values on a 6" motor will be
  • Y23.0 @ FL -Y27.5 @ Max Load.
  • B18.2 . . . . B23.2
  • R8.0 . . . . R7.8
  • Performance is typical, not guaranteed, at specified voltages and specified capacitor values. Performance at voltage ratings not shown is similar, except amps vary inversely with voltage.